Raijintek's Leto Pro is a heatpipe-based CPU cooler that, conceptually, takes inspiration from their line up of slim-style coolers. This provides the Leto Pro with the highest possible degree of motherboard compatibility and their respective RAM modules and slots. As such this cooler offers the mid-range performance class a superb degree of performance. This is achieved via the height of the cooler which, at 155 mm, offers an above average cooler surface area as well as four heatpipes instead of the standard three.
THE LETO PRO CPU COOLER FROM RAIJINTEK AT A GLANCE:
Tower cooler with superb cooling performance
Four copper heatpipes with direct CPU contact
Aluminium fins mounted without soldering points
Low 155 mm height
Two high-performance fans for effective cooling with RGB lighting
Compatible with all current AMD- and Intel sockets
THE LETO PRO CPU COOLER FROM RAIJINTEK IN DETAIL
The aluminium heatsink counts among the flattest of its kind, and its extensive compatibility is due in no small part to this. To this end the heatsink is designed for the installation of two fans rather than one. This offers the option of a future upgrade for increasing airflow and cooling performance yet further. The copper heatpipes rely on Raijintek's C.D.C technology which enables direct CPU contact. This increases the effectiveness with which heat is transported away from the processor.
The elegantly and, as discussed, custom design renders soldering between individual fins and heatpipes unnecessary, instead opting to press them together. On the one hand this minimises the risk of damage to the heatpipes while increasing its thermal efficiency. But equally this approach also minimises the environmental impact of its manufacturing, thus putting the Leto Pro at the fore of 'green IT'.
The sleek-looking, black Iris LED fans with RGB lighting are 120 mm with a 4-pin PWM connector and a gigantic maximum airflow of 95.14 m³/h. It can be controlled by the motherboard, which automatically adjusts in accordance with power requirements. This also makes the Leto Pro whisper-quiet while generating maximum cooling power when required. The fans are attached with vibration-damping pins instead of clamps.
Any current socket along with their respective CPUs can utilise the Leto thanks to its mounting kit. The installation is both simple and user friendly, while the bundled instruction manual explains the installation process in a clear and concise manner.
Dimensions: 127 x 155 x 76 mm (W x H x D)
Material: Aluminium (fins, base), copper (heatpipes)
Heatpipes: 4x Ø 6 mm
Fans: 2x 120 mm (max. 25 dB(A), 800 - 1.800 RPM, 95,14 m³/h, 1,6 mm H2O)
LED Lighting: RGB
Input Voltage: 12 V
Start Voltage: 7,5 V
Connector: 4-Pin PWM
Lifespan: 40.000 h
Intel: Socket 775, 115x, 1366, 2011, 2011-V3, 2066
AMD: Socket AM4, AM3( ), AM2( ), FM2( ), FM1