This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass and an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel includes the typical BitFenix logo on the front and features three pre-installed 120 mm fans, while the fourth is placed at the back. All four fans have digitally addressable RGB-LEDs. Furthermore, users will appreciate the presence of two 3,5" slots, two 2,5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations.
THE HIGHLIGHTS OF THE BITFENIX NOVA MESH A-RGB TG MIDI-TOWER:
New version of the popular Nova TG Midi-Tower with fine mesh front panel
Tinted, tempered glass side, motherboards up to a E-ATX formfactor
Supports gaming GPUs up to 36 cm in length
Slots for 3x 120 mm- or 2x 140 mm fans in the front and 2x 120 in the roof
Four pre-installed fans with digitally addressable RGB LEDs
Space for 240 mm radiator in roof and up to 280/360 radiator in front
Space for 2x 3,5/2,5- and 3x 2,5" drives
BITFENIX NOVA MESH A-RGB TG: SLEEK MIDI-TOWER IN BLACK
The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant and timeless figure and stands out from the competition. The clean lines and sleek design not only look good, they fulfil a purpose: The BitFenix Nova Mesh A-RGB TG keeps out unwanted dust while also minimising noise.
BitFenix's modern approach to design also means that the motherboard is located towards the top of the case and the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust and dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass.
PLENTY OF SPACE FOR WELL-COOLED HARDWARE
A large cut-out in the motherboard tray enables users to benefit from convenient and easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2,5/3,5" slots are available in the HDD cage beneath the PSU shroud. Two 2,5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components.
The case's cooling is catered for by up to three 120- or two 140 mm fans in the front. Additionally, the roof offers space for two additional 120 mm fans. There are four pre-installed 120 mm fans with digitally addressable RGB-LED lighting from BitFenix' Spectre Series, one in the rear and three in the front that ensure heat is exhausted and dissipated efficiently. Thanks to the fine mesh front and dust filter in the roof, the interior is sure to remain clean and dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans - with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforehand.
The I/O panel located on top of the case towards the front includes two USB 3.0- and two audio ports. This is complemented by the inclusion of a power- and reset switch.
Dimensions: 201 x 437 x 465 mm (W x H x D)
Material: Steel, ABS plastic, tempered glass
Weight: 5,3 kg
Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX
3x 120 mm / 2x 140 mm (Front)
2x 120 mm (Roof)
1x 120 mm (Rear)
3x 120 mm (Front, digitally addressable RGB-LEDs)
1x 120 mm (Rear, digitally addressable RGB-LEDs)
1x max. 360/280 mm (front)
1x max. 240 mm (roof)
1x max. 120 mm (rear)
2x 2,5/3,5" (internal)
3x 2,5" (internal)
Expansion slots: 7
2x USB 3.0
1x HD-Audio In/Out
1x Power Button
1x Reset Button
PSU: Standard PS2 ATX-Format (optional)
Max GPU length: 360 mm
Max CPU cooler height: 160 mm
Max PSU length: 220 mm
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at 365games.co.uk we give you 2.5% of the price you paid back in Player PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
99% of deal stock left.
Want to know when BitFenix Nova Mesh A-RGB Midi-Tower Case - Black Window drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.