This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass and an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. Behind this lies a fine layer of Nylon, which functions as a dust filter. In spite of the fine mesh, any brightly illuminated fans installed behind it remain visible from the outside. The front panel includes the typical BitFenix logo on the front and features two pre-installed 120 mm fans, one of which is located in the back and includes RGB-LED. Furthermore, users will appreciate the presence of two 3,5" slots, two 2,5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations.
THE HIGHLIGHTS OF THE BITFENIX NOVA MESH TG MIDI-TOWER:
New version of the popular Nova TG Midi-Tower with fine mesh front panel
Tinted, tempered glass side
Supports gaming GPUs up to 36 cm in length
Slots for 3x 120 mm- or 2x 140 mm fans in the front and 2x 120 in the roof
Two pre-installed fans for great airflow, perfect for air-cooled setups
Space for 240 mm radiator in roof and up to 280/360 radiator in front
Space for 2x 3,5/2,5- and 3x 2,5" drives
BITFENIX NOVA MESH TG: SLEEK MIDI-TOWER IN BLACK
The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant and timeless figure and stands out from the competition. The clean lines and sleek design not only look good, they fulfil a purpose: The BitFenix Nova Mesh TG keeps out unwanted dust while also minimising noise.
Both basic versions of the Nova Mesh TG can be differentiated by their left side panels (with or without tempered glass). BitFenix's modern approach to design also means that the motherboard is located towards the top of the case and the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust and dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass.
PLENTY OF SPACE FOR WELL-COOLED HARDWARE
A large cut-out in the motherboard tray enables users to benefit from convenient and easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2,5/3,5" slots are available in the HDD cage beneath the PSU shroud. Two 2,5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components.
The case's cooling is catered for by up to three 120- or two 140 mm fans in the front, a 120 mm fan comes pre-installed. Additionally, the roof offers space for two additional 120 mm fans. The pre-installed 120 mm RGB-LED fan in the rear ensures heat is exhausted and dissipated efficiently. Thanks to the fine mesh front and dust filter in the roof, the interior is sure to remain clean and dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans - with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforehand.
The I/O panel located on top of the case towards the front includes two USB 3.0- and two audio ports. This is complemented by the inclusion of a power- and reset switch.
Dimensions: 201 x 437 x 465 mm (W x H x D)
Material: Steel, ABS plastic, tempered glass
Weight: 5,3 kg
Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX
3x 120 mm / 2x 140 mm (Front)
2x 120 mm (Roof)
1x 120 mm (Rear)
1x 120 mm (Front)
1x 120 mm (Rear, RGB-LEDs)
1x max. 360/280 mm (front)
1x max. 240 mm (roof)
1x max. 120 mm (rear)
2x 2,5/3,5" (internal)
3x 2,5" (internal)
Expansion slots: 7
2x USB 3.0
1x HD-Audio In/Out
1x Power Button
1x Reset Button
PSU: Standard PS2 ATX-Format (optional)
Max GPU length: 360 mm
Max CPU cooler height: 160 mm
Max PSU length: 220 mm
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at 365games.co.uk we give you 2.5% of the price you paid back in Player PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
Want to know when Bitfenix Nova Mesh TG Midi-Tower - Black drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.