The Saber is an extremely impressive Midi-Tower case from the case-building professionals at BitFenix. The brushed aluminium front is devoid of distractions with just two vertical light strips present that are reminiscent of a sword or sabre - and this is what inspired the naming of the case. The side strips act as air intakes as well as dust filters which can be removed for easy cleaning and maintenance. The top also has a large mesh with a magnetic dust filter, beneath which users will be pleased to find sufficient space for a 240 mm radiator. Additionally, the magnetic cover, which also acts as a noise dampener, can be removed if you prefer in order to prioritise airflow instead.
BitFenix also included two quiet-running 120 mm fans in with the case. The fan at the back is from their in-house Spectre series of fans and includes RGB lighting which, thanks to the tempered glass side panel, bathes the interior in vibrant colours that can also be admired from outside. The case is built with space as a high priority, and as a result even E-ATX motherboards fit with ease and needless to say there is plenty of space for optimal cable management as well. One of the more unusual features of this case lies in it allowing users to install graphics cards vertically, with said graphics cards able to measure up to 400 mm in length.
THE FEATURES OF THE BITFENIX SABER MIDI-TOWER AT A GLANCE:
Exceptionally stylish Midi-Tower for motherboards up to E-ATX
Addressable RGB-LED lighting and controller on front
Large tempered glass side panel, roof with noise dampening
I/O-Panel with 2x USB 3.0 & HD Audio In/Out & RGB switch
Support for three radiators in 360-/280-, 240- and 120 mm formats
2x 3,5/2,5" & 4x 2,5" drive slots
2x 120 mm fans pre-installed, 1x with RGB-LEDs - total of 6 possible
Supports graphics cards up to 40 cm long & CPU coolers 17,8 cm tall
STYLISH MIDI-TOWER WITH RGB-LED LIGHTING WITH ALUMINIUM-LOOK FRONT
The exterior of the case impresses with its largely unfussy appearance and matt black surfaces. What is unusual however, is the use of large tempered glass side windows and, of course, the brushed aluminium front with its embedded digitally addressable RGB lighting - lending it the appearance of a glowing RGB sword. With the help of a compatible motherboard, the RGB-LEDs on the front, as well as the lighting in the RGB-LED fan at the back can be configured and synchronised to make for some striking lighting effects. Alternatively, the case does offer an integrated controller which can be controlled using a switch on the I/O panel.
This spacious Midi-Tower fits motherboard from Mini-ITX- all the way up to E-ATX. Two 3,5- or 2,5" drives can be installed in one cage in the PSU shroud, while four further 2,5" drives can be concealed behind the motherboard tray. Hardware and cooling components enjoy a clean and attractive presentation inside the case thanks to BitFenix's use of 4 mm thick tempered glass, as well as a PSU shroud that succeeds in concealing the PSU and unsightly cables.
At the rear, the case is equipped with a 120 mm RGB fan, while in the front, a fan without lighting provides a cool stream of fresh air. In addition, two 120 mm fans can be fitted in the top and three in the front. Two 140 mm models are also possible in the front. The ventilation openings in the front, base and lid are all equipped with tool-free removable dust filters.
In the front, the BitFenix can accommodate 360- or 280-millimeter Saber radiators up to 45 mm in thickness while also reserving adequate space for a 120 mm counterpart in the rear. A 240 mm radiator can also be attached to the lid, provided that the RAM is not higher than 40 millimetre limit. CPU coolers can be up to 17.8 centimetres high and powerful graphics cards up to 40 cm in length are compatible. It is also possible to install the graphics card vertically.
Dimensions: 220 x 454 x 465 mm (W x H x D)
Material: Aluminium, Steel, plastic, tempered glass
Weight: approx. 7 kg
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total possible fans:
3x 120 mm/ 2x 140 mm (Front)
1x 120 mm (rear)
2x 120 mm (roof)
1x 120 mm (front)
1x 120 mm (RGB-LEDs, rear)
max. 1x 360 mm or 1x 280 mm (Front)
max. 1x 240 mm (roof)
1x 120 mm (rear)
Dust filter: Roof, front, bottom
2x 3,5/2,5" (internal)
4x 2,5" (internal)
PSU: 1x Standard ATX bis 185 mm (optional)
Expansion slots: 7+2
2x USB 3.0 (internal connection)
1x Audio In/Out
Max GPU length: 400 mm
Max CPU cooler height: 178 mm
RGB Controller Connections:
1x 4-Pin RGB
2x 3-Pin RGB
1x Front Button
1x SATA power cable
Choose how fast you receive your order with the multiple delivery methods we have to offer.Learn about our delivery options
Our main focus is to provide the best customer service possible to our community.We're here for you
Every time you make a purchase at 365games.co.uk we give you 2.5% of the price you paid back in Player PointsSee even more reasons
For 15 years we have been working our hardest to ensure that our customers and suppliers can trust us.Learn more about us
40% of deal stock left.
Want to know when Bitfenix Saber RGB Midi-Tower Case - Black drops below a certain price? Enter your email address and price below and we'll let you know when it drops below that price!
Why over half a million customers stay with us...
Please note that this address is not for correspondence or product returns. If you would like to contact us, please use the form on the contact page.