Raijintek Morpheus 8057 Heatpipe VGA Cooler For Nvidia RTX and Radeon RX - Black

A cooler change is particularly useful if the factory-installed cooler is too loud or does not provide enough cooling capacity. With the Morpheus 8057 provides Raijintek a powerful cooler for graphics cards from NVIDIA and AMD reference design to. With its enormous size and the possibility of mounting two large fans , it offers the Morpheus 8057 a huge cooling potential.

The features of the Raijintek Morpheus 8057 heatpipe VGA cooler at a glance:

- High-performance VGA cooler with copper heat pipes

- For NVIDIA GeForce RTX 2060 to 2080 Ti in reference design

- Also for AMD Radeon RX 5600 XT to 5700 XT in reference design

- High cooling capacity for up to 360 W TDP

- Twelve heat pipes made of copper

- Including storage cooler and retaining clips

Raijintek Morpheus 8057: Tremendous cooling performance for graphics cards

Raijintek equips the Morpheus 8057 with a polished copper base plate , which conducts the waste heat from the graphics processor to twelve copper heat pipes . These run through the total of 129 aluminum fins of the heat sink. To cool additional chips, Raijintek includes three copper heatsinks and eight aluminum heatsinks as well as corresponding heat-conducting pads with the Morpheus 8057 . The graphics card cooler is suitable for waste heat of up to 360 watts TDP.

Two 120 mm fans can be mounted on the Raijintek Morpheus 8057 . The solution for installing a fan is simple. Included in delivery areBrackets for 13 and 25 mm fans included. Since fans are not included in the scope of delivery, there is maximum freedom of choice and the option of implementing practically any configuration from ultra-silent to maximum-OC.

The mounting system of the Morpheus is a real highlight . This consists of two strips that are screwed to the base plate. The Morpheus 8057 is suitable for NVIDIA graphics cards of the type GeForce RTX 2060 (Super), RTX 2070 (Super) and RTX 2080 (Super, Ti) as well as AMD Radeon RX 5600 XT and 5700 (XT) in the reference design . For a more stylish look, the entire cooler is covered with a black coating .

Note: To install the Morpheus, the original cooler must be dismantled, which means that the warranty against the graphics card manufacturer is lost. The conversion is therefore at your own risk. Remnants of thermal paste and pads must be removed very carefully before installation, otherwise the passive heat sinks, for example, could fall off when heated. The thermal pads and thermal paste required for assembly are included in the scope of delivery. An adapter cable for connecting (PWM) fans to the graphics card is not included in the scope of delivery and must be ordered separately.

Technical details:

- Dimensions (GPU cooler): 254 × 100 × 44 mm (L x W x H)

- Dimensions (RAM heatsinks):

- Type A: 85 x 11 x 6.2 mm (W x H x D)

- Type B: 50 x 11 x 4 mm (W x H x D)

- Type C: 50 x 14.1 x 10 mm (W x H x D)

- Type D: 37 x 7 x 10 mm (W x H x D)

- Type E: 5.9 x 6 x 11 mm (W x H x D)

- Weight: approx. 515 g

- Material: copper (base plate, heat pipes), aluminum (fins)

- Heat pipes: 12x Ø 6 mm

- Heat dissipation capacity: max. 360 W

- Fan (optional): 2x 120 mm

Compatibility:

- AMD Radeon (reference design)

- RX 5600 XT

- RX 5700 / RX 5700 XT

- NVIDIA Geforce (reference design)

- RTX 2060 / RTX 2060 Super

- RTX 2070 / RTX 2070 Super

- RTX 2080 / RTX 2080 Super / RTX 2080 Ti

Contents:

- 1x Raijintek Morpheus 8057 GPU cooler

- 2x RAM heatsink type A (copper)

- 1x RAM heatsink type B (copper)

- 1x RAM heatsink type C (aluminum)

- 1x RAM heatsink type D (aluminum)

- 6x RAM heatsink type E (aluminum)

- 2x mounting brackets

- 1x backplate

- 2x rubber pads

- 3x thermal pads type A

- 2x thermal pads type B

- 4x washers

- 4x M3 screws

- 4x spacers

- 4x spring screws

- 4x fan clips (25 mm)

- 4x fan clips (13 mm)

- 1x thermal paste

- 1x operating instructions